Visit our Agricultural Machinery web Site

Golf Cars/Buggies

i-m4 Single Seat Golf Buggy

                            

i-m4 PATENT PROTECTED

Body & Chasis
Steel frame construction
Strong plastic body
Range of colours available


Power
Motor 36V 1200 Watt permanent magnetism
Batteries 12V 48AH x 3
Automatic pulse charger - input AC110V/60HZ output DC36V/8A
Recharge time 6-8 hours
Maximum travel distance 50km
CURTIS Controller 1227-3402 dc36v/160A
Hall accelerator continuous variable speed system
High (19km p/h) / Low (8km p/h) switch

Dimensions
Overall length 1.27m
Overall width 0.82m
Overall height 1.05m
Wheel base 90cm
Minimal ground clearance 11cm

Performance
One person seating capacity
Carrying capacity 200kg
Weight 145kg with batteries, 100kg without batteries
Maximum speed 13-15km/h
Slope climbing capacity 17 degrees
Brake range ≤4m
Turning radius ≤3m
Forward & reverse console mounted

Other
Helix spring absorbers
Tyres 32.5cm x 15cm 4 wheels
Electromagnetic & mechanical braking system

Quick release seat system

Folded handlebars


Yamaha Petrol or Electric Golf Cars



Features -
  • EnduraDrive Transaxle with Internal Disc Brake Technology (motorsports technology)
  • Yamaha –built 357F gasoline engine
  • Largest most comfortable seat in the industry
  • ClimaGuard Top with Dual Gutters
  • HybriCore Chassis, lighter and stronger
  • Automotive-style Dash
  • Tru-Trak II Fully Independent Front Suspension for smooth and responsive handling
  • Sentry Wraparound Protection System
Engine -
Type: Yamaha-built, low-emission single cylinder 60 degree incline OHV
Displacement: 357 ccm
Transmission: EnduraDrive V-belt automatic forward/reverse transaxle equipped with high-precision helical gears, 11,40:1 drive axle ratio
Fuel tank capacity: 25 L
Dimensions -
Overall length: 2395 mm
Overall width: 1200 mm
Overall height: 1789 mm / 1189 (without suntop)
Wheelbase: 1640 mm
Ground clearance: 110 mm
Dry weight: 243 kg
Features -
Brakes: Maintenance-free internal transaxle disc brake
Frame: HybriCore Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step full-immersion phosphate treament, electro-deposition epoxy-based coating, and an electrostatically appllied polyester/urethane powder top coat
Front body: Custom-formulated thermoplastic olefin, painted with a two-part top coat of high-luster automotive-grade polyurethane
Bumpers: Front & rear 8 km/h energy-absorbing bumpers
Front suspension: Tru-Trak II fully independent automotive-style strut suspension
Rear suspension: Unit swing arm with coil springs over hydraulic shock absorber

Special Offers

There are currently no Special Offers added to our system, please check back again soon.